Yamaha, four stroke, remote steering

Used Yamaha Midrange 70HP Outboard

SKU YAM-MIDRANGE-U-20  |  Serial 6EK-4449945

$11,495
Shaft
Long, 20in
Start
Electric start
Steering
Remote steering
Trim
Power trim and tilt
Finance this engine
Warranty
90 day parts and labor warranty from us, or the balance of factory cover if it runs longer.
Serial number
6EK-4449945, printed on your invoice and matched to the unit that ships.
Payment
Bank transfer, Apple Pay, Chime and Zelle. Crypto takes 15 percent off the engine price.

Add to your order

Shipped in the same crate, so there is no second freight charge.

Remote Control Kit Fits remote steering engines from 40hp up.
$1,010
Binnacle Control Kit For console installations with a top mount throttle.
$1,340
Propeller, pitched to order Send boat length, weight and use and we pitch it for you.
$420
First Service Kit The twenty hour service, boxed with the engine.
$148

Used Yamaha Midrange 70HP Outboard for Sale

Buy a used Yamaha 70HP four stroke outboard for sale online, on a 20 inch long shaft with electric start, remote steering and power trim and tilt. Seventy horsepower is the size that suits 16 to 18 foot aluminum hulls, light skiffs and pontoons, and Yamaha midrange four strokes are among the most durable engines in that band. This listing is priced well above the other 70s we hold, which we would rather explain than leave you to notice: ask us what is included with it before you compare the numbers, because at this end of the market the rigging that comes with an engine accounts for a large part of the difference. Send us the hull model and transom measurement and we will confirm the fit.

Supplied with

  • Engine, cowling and mounting hardware, factory assembled
  • Owner manual, warranty booklet and registration certificate
  • Propeller not included on engines from 40hp up, pitched to order on request
  • Remote control box, cables and rigging tube available as an add on
  • First service kit available at checkout, oil filter and gear oil

Not sure on shaft length

Measure vertically from the top of the transom to the lowest point of the hull. Fifteen inches takes a short shaft, twenty inches a long shaft, twenty five inches an extra long. This engine is a long shaft, 20in.

About the price on this listing

We hold three 70 horsepower Yamahas and this is by some distance the dearest. That is unusual enough to explain rather than let a buyer find it and draw their own conclusion.

Used engine prices are set by what each one cost to acquire and what came with it, not by a formula applied to output and year. An engine that arrives complete with controls, harness, gauges and a propeller is a very different package from a bare motor, and at this size that equipment is a significant part of the cost.

So before you compare this against the 2016 Yamaha F70 or the 2013 F70LA on price alone, ask us what each one includes. We will tell you straight, including if the answer is that one of the others is the better buy for you.

Yamaha 70HP specs as listed

Yamaha 70HP specifications as listed on this engine
SpecificationThis Yamaha 70
Output70 horsepower at the propeller shaft
Engine typeFour stroke
Shaft length20 inch, long
StartingElectric, key switch
SteeringRemote, side mount or binnacle
Trim and tiltPower trim and tilt
ConditionUsed, compression tested before listing

The listing carries a recent model year on a used engine, which we confirm from the serial number rather than repeat as fact. Hours are read from the engine before dispatch.

What boats a Yamaha 70HP outboard suits

Aluminum fishing boats from 16 to 18 feet, light skiffs and pontoons to about 20 feet. It gives a loaded hull real margin over a 60 without the weight of a 90.

Check the maximum rating on your capacity plate before you order, and measure the transom from the top straight down to the hull bottom at the centerline.

Buying a Yamaha midrange four stroke

Yamaha midrange engines have a strong reputation for running a long time with ordinary servicing, and they hold value better than any other brand at this size.

Ask for compression on all cylinders, the ECU hour reading, and whether the engine ran in salt water and was flushed. We answer all three in writing before you pay.

The rest of the range is on Yamaha outboard motors.

What to establish before ordering this one

Because this listing sits above the other 70s here, it is worth being specific about what to ask us before you commit.

What is included: controls, harness, gauges, propeller. Ask for the list rather than assuming, because on a midrange engine that equipment is a large share of the value.

The hour reading from the ECU, and compression on every cylinder, both of which we take before shipping.

The model year confirmed from the serial number rather than from the supplier export.

And whether the engine ran in salt water and was flushed after use. Those five answers will tell you whether this is the right engine of the three 70s in stock, and if it is not, we will point you at the one that is.

Frequently asked questions

Why is this Yamaha 70HP dearer than the others in stock?

Used prices are set by acquisition cost and by what comes with the engine, not by a formula on output and year. Rigging, controls and a propeller are a large part of the difference. Ask us what each listing includes.

What size boat needs a Yamaha 70HP outboard?

A 16 to 18 foot aluminum fishing boat, a light skiff, or a pontoon to about 20 feet. Check the maximum rating on your capacity plate first.

What model year is this Yamaha 70HP?

The listing carries a recent year against a used engine. We confirm it from the serial number before shipping rather than repeat an export field as fact.

How many hours are on this Yamaha 70HP?

Read from the ECU before dispatch. Ask and we will send you the figure along with compression on every cylinder.

Are Yamaha midrange four strokes reliable?

They have one of the better records in the class and hold resale better than any other brand at this size. Service history and salt exposure still decide the life of any individual engine.

Specifications

Horsepower
70hp at 5500 rpm
Model year
2026
Shaft length
20 in, long
Starting system
Electric, key switch
Trim and tilt
Power trim and tilt
Steering
Remote, side mount or binnacle
Recommended fuel
87 octane minimum, unleaded
Recommended oil
Yamalube 10W-30 four stroke
Warranty
90 days parts and labor, or the balance of factory cover
Recorded hours
On request

Shipping and crating

The engine is bolted upright to a purpose built pallet, braced at the cowling and skinned before it leaves the warehouse. Crates are photographed on the dock and the photographs are attached to your order record.

Freight is curbside by default. The carrier calls ahead to arrange a delivery window, and you will need a second pair of hands or a tractor to take the crate off the truck. Liftgate service and delivery direct to an authorized dealer can both be added at checkout.

Standard transit is five to ten working days depending on zone, express is one to three. Alaska, Hawaii and Puerto Rico are quoted separately.

Curbside freight cost and transit time for this engine by destination zone
Destination zone Freight on this engine Transit
Standard freight $100 About a week
Express freight $250 1 to 3 days

Warranty

This used Yamaha is compression tested, run on the dyno and listed with its hour count and service history. It carries a ninety day parts and labor warranty from us unless the balance of factory cover runs longer.

Warranty work can be carried out at any authorized Yamaha dealer in the United States. You are not tied to us for servicing, and buying online does not shorten or void the factory cover.

The serial number on this listing, 6EK-4449945, is the unit that ships to you. It appears on your invoice and on the warranty registration.

3 years, extendable to 5 years

Extended service cover can be added within the first year. Ask the sales desk to add it to your invoice.

Related engines

All Yamaha stock
Used Used Yamaha F70 70HP Outboard, on a timber stand inside the workshop
Yamaha

F70

2016, 70hp, four stroke, 20in long shaft, 200 hours
$3,600
View