Mercury outboards

Mercury 75 HP Outboard Motors

Mercury splits its range into FourStroke for general use, Pro XS for hole shot and top end, and Verado for quiet offshore work. A Mercury at 75 horsepower suits bay boats, pontoons and aluminum hulls.

Closest we have

All stock

Nothing at exactly 75hp is listed today, so these are the nearest outputs we hold. If it has to be 75hp, say so and we will source one.

Used Used 2023 Mercury 50HP Outboard, on a wheeled engine stand in the yard, port side
Mercury

50HP

2023, 50hp, four stroke, 20in long shaft, 19 hours
$2,750
View
New New Mercury 50HP Outboard, manufacturer studio photograph, port side on white
Mercury

50HP

2024, 50hp, four stroke, 20in long shaft
$6,995
View
Used Used 2024 Mercury 60HP Outboard, manufacturer studio photograph, port side on white
Mercury

60HP

2024, 60hp, four stroke, 20in long shaft
$6,999
View
Used Used 2027 Mercury 60HP Outboard, manufacturer studio photograph, port side on white
Mercury

60HP

2027, 60hp, four stroke, 20in long shaft
$7,560
View
New New Mercury 60HP Outboard, manufacturer studio photograph, port side on white
Mercury

60HP

2026, 60hp, four stroke, 20in long shaft
$8,995
View
New New 2026 Mercury 90HP Outboard, manufacturer studio photograph, port side on white
Mercury

90HP

2026, 90hp, four stroke, 20in long shaft
$8,495
View
New New 2024 Mercury 90HP Outboard, manufacturer studio photograph, port side on white
Mercury

90HP

2024, 90hp, four stroke, 20in long shaft
$9,380
View

Buying a Mercury 75hp

Expect 145 to 163 kg, 320 to 359 lb dry, long shaft, electric start, remote, power trim and tilt, and external tank. Read the suffix: E is electric start, L is long shaft, PT is power trim, H is tiller. An ELPT is electric start, long shaft, power trim.

We have 9 matching engines below: 2 in stock and ready to crate, and 7 we source to order in seven to fourteen days.

Buying used at this size, often the same powerhead as the 90 and 115, so check hours and service history rather than the number on the cowling.

Listed prices on this page run from $2,750 to $9,380. Freight, controls and a propeller are quoted separately.

Common questions

What size boat does a 75hp outboard suit?

It suits bay boats, pontoons and aluminum hulls. Always check the capacity plate at your transom first, since that gives the maximum the hull is rated for and it is illegal as well as unwise to exceed it.

How much does a 75hp outboard weigh?

Typically 145 to 163 kg, 320 to 359 lb. That figure matters more than most buyers expect: it decides whether you can lift the engine alone, and whether your transom bracket is rated for it.

Which shaft length do I need?

Measure vertically from the top of the transom to the lowest point of the hull. Fifteen inches takes a short shaft, twenty inches a long shaft, twenty five inches an extra long. Fitted right, the anti ventilation plate finishes level with the hull bottom. Send us a photograph with a tape measure in frame if you are unsure.

Does the price include controls and a propeller?

Remote steering engines are supplied without a control box or cables unless you add them, and engines from 40hp up ship without a propeller so it can be pitched to your hull. Both can go in the same crate, so there is no second freight charge.

How does it get to me?

Crated and shipped to all 48 states. Freight is priced from your zip code against the destination zone, and the exact figure is shown at checkout before you pay. Ask for a written quote first if you would rather see it in an email.