Yamaha outboards

Yamaha 90 HP Outboard Motors

Yamaha is the volume choice in the United States and the easiest range to get serviced anywhere on the coast. A Yamaha at 90 horsepower suits pontoons, bay boats and center consoles to about twenty feet.

What we have

All stock
Used Used Yamaha 90 SHO 90HP Outboard, on a stand outside the roller door with the VMAX SHO decal in view
Yamaha

90 SHO

2021, 90hp, four stroke, 20in long shaft, 100 hours
$4,350
View
Used Used 2007 Yamaha F60 60HP Outboard, on a steel stand against a concrete wall
Yamaha

F60

2007, 60hp, four stroke, 20in long shaft
$4,500
View
Used Used Yamaha F115XB 115HP Outboard, on a green engine stand in the dealer yard
Yamaha

F115XB

2014, 115hp, four stroke, 25in extra long shaft
$4,100
View
Used Used Yamaha F70 70HP Outboard, on a timber stand inside the workshop
Yamaha

F70

2016, 70hp, four stroke, 20in long shaft, 200 hours
$3,600
View
Used Used 2017 Yamaha F60 60HP Outboard, on the transom of a white hull in a field
Yamaha

F60

2017, 60hp, four stroke, 20in long shaft, 200 hours
$3,600
View

Buying a Yamaha 90hp

Expect 158 to 167 kg, 348 to 368 lb dry, long shaft, electric start, remote, power trim and tilt, and external tank. Shaft length is built into the model code: L is a twenty inch long shaft, X a twenty five inch extra long, and neither means a fifteen inch short shaft.

We have 11 matching engines below: 10 in stock and ready to crate, and 1 we source to order in seven to fourteen days.

Buying used at this size, ninety horsepower is a common repower size, so there is real choice; hold out for one with documented servicing.

Listed prices on this page run from $2,300 to $11,495. Freight, controls and a propeller are quoted separately.

Common questions

What size boat does a 90hp outboard suit?

It suits pontoons, bay boats and center consoles to about twenty feet. Always check the capacity plate at your transom first, since that gives the maximum the hull is rated for and it is illegal as well as unwise to exceed it.

How much does a 90hp outboard weigh?

Typically 158 to 167 kg, 348 to 368 lb. That figure matters more than most buyers expect: it decides whether you can lift the engine alone, and whether your transom bracket is rated for it.

Which shaft length do I need?

Measure vertically from the top of the transom to the lowest point of the hull. Fifteen inches takes a short shaft, twenty inches a long shaft, twenty five inches an extra long. Fitted right, the anti ventilation plate finishes level with the hull bottom. Send us a photograph with a tape measure in frame if you are unsure.

Does the price include controls and a propeller?

Remote steering engines are supplied without a control box or cables unless you add them, and engines from 40hp up ship without a propeller so it can be pitched to your hull. Both can go in the same crate, so there is no second freight charge.

How does it get to me?

Crated and shipped to all 48 states. Freight is priced from your zip code against the destination zone, and the exact figure is shown at checkout before you pay. Ask for a written quote first if you would rather see it in an email.